Welcome to the
MIRATECH Solutions Guide

MIRATECH is the expert in providing fully integrated, proven exhaust compliance solutions for anyone using industrial engines in a Power Generation, Gas Compression and Mechanical Drives.

Your Solution
Contact us for
Pricing & Details

Tell us about your needs

Your selction did not return any results.
Please adjust your selection and try again.


  1. Gas Compression
  2. Power Generation
  3. Rail
  4. NESHAP Regulations
  5. Industrial
  6. Air Compression
  7. Liquids Pumping
  8. Bio-Gas
  9. Greenhouse CO2 Enrichment
  10. Industrial Marine

Engine Type

  1. Bi-Fuel Diesel and Natural Gas
  2. Diesel
  3. Natural Gas Lean Burn
  4. Natural Gas Rich Burn

Noise Control

  1. Yes
  2. No

Engine Size

  1. 20 to 200 hp
  2. 200 to 1350 hp
  3. 1350 to 10,000 hp
  4. 10,000 hp and above

Regulated Pollutants

  1. NOx
  2. NO2
  3. CO
  5. HAP's
  6. Particulate Matter (PM)

Submit your Request for Pricing and Details

Your Solution(s):

Contact Information

Error: Please complete form.

Thank You!

DPF Monitor

MIRATECH’s Diesel Particulate Filter Monitor is part of the filter system that is verified by the California Air Resources Board (CARB).  It monitors the exhaust backpressure drop across the Diesel Particulate Filter and its data-logger collects data to help maintain compliance with emissions, engine operating guidelines, and CARB monitoring requirements.

MIRATECH’s Differential Pressure and Temperature Monitor & Data-Logging (Diesel Particulate Filter (DPF) monitor) system provides warnings when the exhaust-gas pressure reaches high levels, as can happen when a filter becomes clogged with diesel soot or ash. If the monitoring system detects back pressure levels which are too high, it first of all provides a visual alarm for the user by means of illuminated display lamps, and then generates a further audible alarm.

In addition, the DPF Monitor measures the temperature of exhaust entering the DPF, displaying and logging that information.

If desired, actual pressure and temperature values can be shown on the display. The pressure and temperature are continuously written to memory. When an alarm is generated, it remains activated until the relevant values return to normal levels. The audible alarm is switched off when the alarm is acknowledged.

Pressure is measured in the range between 0 and 600 mbar (0 – 240 inches water). Temperatures in the range between 50 °C and 1,050 °C (120 °F – 1920°F) can be displayed.

The operator can ascertain by means of the temperature display whether the exhaust-system temperature is within the optimum range for the filter. If a back-pressure alarm is generated, the operator can raise the temperature of the exhaust gas by increasing the engine load and thus causing the filter to clean itself. The exhaust-gas back pressure will then be reduced, and the warning light will be extinguished.

toll free: 800-640-3141

Request a Quote Today!

  • This field is for validation purposes and should be left unchanged.

Access Catalyzer Silencer Sizing Tool

Already have access? Click here.

Oklahoma Top Places to Work
  • Power Generation
  • Air Compression
  • Liquids Pumping